Copy a Timesheet (iOS)

When you are entering data for a timesheet, you may want to copy or clone the timesheet from the previous entry you created. For example, you could save time by copying the previous timesheet's information if the same crew is performing work for the same shift they completed the day before.

• Required User Permissions

• You can add employees to a copied timesheet.

• You can use Bulk Time Entry to add information for all employees on the timesheet.

• You can copy a previous timesheet you created, or any you have permission to view.

• Grid-based entry is available on tablets, when task codes are enabled.

• 此操作可以离线执行。重新建立网络连接后，离线执行的任务与 Procore同步。

• If offline, you can only copy timesheets that were previously viewed in online mode and cached on your mobile device.

• 创建考勤表

• Line View

• Grid View (Tablet Only)
  

1. Open the Procore app on an iOS mobile device and select a project.

2. Tap the Timesheets tool.

3. Tap the create icon.

4. Select what you want to copy.

   • Tap Copy From Previous to copy the previous timesheet that you created.

   • Tap Copy From Any Date to copy any previous timesheet that you have access to. Then tap the timesheet to copy.

5. Optional: Tap Add to include additional employees and equipment that were not selected on the previous timesheet.

6. Optional: Tap Bulk Time Entry to apply the same information to all labor on the Timesheet.

7. Enter time for Labor.

   1. Tap Add Line next to the crew member or employee name to enter information into the timecard.

   2. Tap any of the fields to enter labor information. 显示/隐藏字段

       Notes

      Project Timesheets Administrators configure how time is collected for each project. Additionally, each some fields can be configured as required, optional, or hidden.

      • Classification: The resource classification.

      • Codes

        • Task Code: A combination of Cost Codes and Sub Jobs.

        • Cost Code: The cost code associated with the time entry.

        • Sub Job: Select from the drop-down menu the sub job associated with the time entry.

      • Location: The location where the work was performed.

      • Time

        • Total Time: The total time worked for the day.

        • Start Time: The time the resource started working.

        • Stop Time: The time the resource stopped working.

        • Lunch Time: The amount of time taken for a lunch break.
          Notes:

          • The amount of time selected will be subtracted from the Total Time.

          • This field will only be available if Start Time and Stop Time is enabled.

        • Time Type: Select the type of pay being entered.

          • Regular Time

          • Double Time

          • Exempt

          • Holiday

          • Overtime

          • PTO

          • Salary

          • Vacation

      • Billable: Tap the toggle to indicate whether or not the entry is billable.

      • Auto-Apply Overtime Rules (Beta). Tap the toggle to automatically enforce overtime rules.

      • Description: Additional comments that will show in the timecard entry.

   3. Tap Add Line to add a new line for the timecard.

   4. Tap Apply.

8. Review the summary for the timecard's hours, and the daily and weekly hours across all projects.

9. Submit the timesheet.

   • Tap Submit.

   • Tap Submit and Add Quantities. See Add Quantities to a Timesheet (iOS).

1. Open the Procore app on an iOS mobile device and select a project.

2. Tap the Timesheets tool.

3. Tap the create icon.

4. Select what you want to copy.

   • Tap Copy From Previous to copy the previous timesheet that you created.

   • Tap Copy From Any Date to copy any previous timesheet that you have access to. Then tap the timesheet to copy.

5. Optional: To add another resource, tap Add Resource.

   1. Select the crews, employees, or equipment you want to add.

   2. Tap Done.

6. Follow steps to enter or update timecard information:

   • Enter Time by Tapping Cells

     1. Tap any task code field for a user or equipment and enter the timecard information.
        Note: You can tap multiple cells to bulk enter time.

        显示/隐藏字段

         Notes

        Project Timesheets Administrators configure how time is collected for each project. Additionally, each some fields can be configured as required, optional, or hidden.

        • Task Code: A combination of Cost Codes and Sub Jobs.

        • Location: The location where the work was performed.

        • Time

          • Total Time: The total time worked for the day.

          • Start Time: The time the resource started working.

          • Stop Time: The time the resource stopped working.
            Note: You will only see the Start and Stop fields if you have configured your settings to show these fields. See Configure Advanced Settings: Project Level Timesheets.

          • Lunch Time: The amount of time taken for a lunch break.
            Notes:

            • The amount of time selected will be subtracted from the Total Time.

            • This field will only be available if Start Time and Stop Time is enabled.

          • Time Type: The type of pay being entered.

            • Regular Time

            • Double Time

            • Exempt

            • Holiday

            • Overtime

            • PTO

            • Salary

            • Vacation

        • Billable: The ON toggle indicates that entry is billable.

        • Auto-Apply Overtime Rules (Beta). The ON toggle automatically enforces overtime rules.

        • Description: Additional comments that will show in the timecard entry.

        显示/隐藏字段

         Notes

        Project Timesheets Administrators configure how time is collected for each project. Additionally, each some fields can be configured as required, optional, or hidden.

        • Task Code: A combination of Cost Codes and Sub Jobs.

        • Operator: The user operating the equipment.

        • Operating Hours: How many hours the equipment was operating.

        • Idle Hours: How many hours the equipment was idle.

     2. Tap Apply.

   • Bulk Enter Time Using Checkboxes

     1. Tap the checkboxes for the resources you want to enter time for.

     2. Enter the information to be applied to all selected timecards.
        Note: If you wish not to apply the information to one of the selected cells, tap the highlighted cell to deselect.

        显示/隐藏字段

         Notes

        Project Timesheets Administrators configure how time is collected for each project. Additionally, each some fields can be configured as required, optional, or hidden.

        • Task Code: A combination of Cost Codes and Sub Jobs.

        • Location: The location where the work was performed.

        • Time

          • Total Time: The total time worked for the day.

          • Start Time: The time the resource started working.

          • Stop Time: The time the resource stopped working.
            Note: You will only see the Start and Stop fields if you have configured your settings to show these fields. See Configure Advanced Settings: Project Level Timesheets.

          • Lunch Time: The amount of time taken for a lunch break.
            Notes:

            • The amount of time selected will be subtracted from the Total Time.

            • This field will only be available if Start Time and Stop Time is enabled.

          • Time Type: The type of pay being entered.

            • Regular Time

            • Double Time

            • Exempt

            • Holiday

            • Overtime

            • PTO

            • Salary

            • Vacation

        • Billable: The ON toggle indicates that entry is billable.

        • Auto-Apply Overtime Rules (Beta). The ON toggle automatically enforces overtime rules.

        • Description: Additional comments that will show in the timecard entry.

        显示/隐藏字段

         Notes

        Project Timesheets Administrators configure how time is collected for each project. Additionally, each some fields can be configured as required, optional, or hidden.

        • Task Code: A combination of Cost Codes and Sub Jobs.

        • Operator: The user operating the equipment.

        • Operating Hours: How many hours the equipment was operating.

        • Idle Hours: How many hours the equipment was idle.

     3. Tap Apply.

   • Bulk Enter Time for a Single Task Code

     1. Tap the horizontal ellipsis for the task code.

     2. Tap Labor Time Entry or Equipment Time Entry.

     3. Enter the information to be applied to all selected timecards.
        Note: If you wish not to apply the information to one of the selected cells, tap the highlighted cell to deselect.

        显示/隐藏字段

         Notes

        Project Timesheets Administrators configure how time is collected for each project. Additionally, each some fields can be configured as required, optional, or hidden.

        • Task Code: A combination of Cost Codes and Sub Jobs.

        • Location: The location where the work was performed.

        • Time

          • Total Time: The total time worked for the day.

          • Start Time: The time the resource started working.

          • Stop Time: The time the resource stopped working.
            Note: You will only see the Start and Stop fields if you have configured your settings to show these fields. See Configure Advanced Settings: Project Level Timesheets.

          • Lunch Time: The amount of time taken for a lunch break.
            Notes:

            • The amount of time selected will be subtracted from the Total Time.

            • This field will only be available if Start Time and Stop Time is enabled.

          • Time Type: The type of pay being entered.

            • Regular Time

            • Double Time

            • Exempt

            • Holiday

            • Overtime

            • PTO

            • Salary

            • Vacation

        • Billable: The ON toggle indicates that entry is billable.

        • Auto-Apply Overtime Rules (Beta). The ON toggle automatically enforces overtime rules.

        • Description: Additional comments that will show in the timecard entry.

        显示/隐藏字段

         Notes

        Project Timesheets Administrators configure how time is collected for each project. Additionally, each some fields can be configured as required, optional, or hidden.

        • Task Code: A combination of Cost Codes and Sub Jobs.

        • Operator: The user operating the equipment.

        • Operating Hours: How many hours the equipment was operating.

        • Idle Hours: How many hours the equipment was idle.

     4. Tap Apply.

7. Optional: To add another task code, tap Add Code. Select the task code and tap Done.

8. Optional: To remove a resource, tap the horizontal ellipsis next to the resource and tap Delete Resource.

9. Review the summary for the timecards' hours, and the daily and weekly hours across all projects.

10. Submit.

    • Tap Submit.

    • Tap Submit and Add Quantities. See Add Quantities to a Timesheet (iOS).