Add Weather Entries (Android)

The Weather section can be used to track many things. For example, you might want to track any delays to the project that may be due to weather conditions or compare team productivity against weather conditions. Each day also has a daily snapshot and weather report that automatically pulls weather information for the project's location from the weather software used on your project.

• Required User Permissions:

  • 'Admin' level permissions on the project's Daily Log tool.

1. Open the Procore app on an Android mobile device and select a project.
   The Tools screen loads, displaying all tools available for this project.

2. Tap the date to select the calendar day for which you want to create a new entry.

3. Tap Weather.

4. Tap the editicon.

5. Tap into the following fields to enter the relevant information:

   Note: Click the caret icon > to expand and v to collapse the field names and their descriptions below.

   Observed Weather Conditions - Field Names and Descriptions

   • Company: Select the company name for which you are creating this log entry.

   • Weather Delay: By default, the Weather Delay field will be set to No. Tap the button to indicate that there was a weather delay on the day you're recording data.

   • Location: Enter the project location where the weather conditions were observed.

   • Sky: Select from the menu an observation made of the sky that day. You may only select one observation.

   • Temperature: Select from the menu the approximate temperature on site that day.

   • Average: Enter the average temperature observed during the workday.

   • Precipitation: Enter the observed precipitation for the day.

   • Wind: Select from the menu the observed wind conditions.

   • Ground / Sea: Select the status of the ground or sea around the project from the menu. You can only select information for either the ground or the sea .

   • Calamity: If the jobsite was subject to a calamity that day, enter the type by selecting from the following from the menu: earthquake, fire, flash flood, landslide, tornado, hurricane, snow, other.

   • Comments: Enter any comments or additional information that further describes the entry (if required).

   • Attachments: Tap any of the following options to add photo or file attachments to the entry:

     • Camera: Use your mobile device's camera to take a photo that is automatically added to the entry once you exit the camera.

       • To take a photo without mark up:

         1. Tap the shutter to take a photo.

         2. Tap Done to attach it to the entry.

       • To take a photo with mark up:

         1. Tap Markup to take the photo and immediately mark it up.

         2. Tap the shutter to take a photo.

         3. Mark up the photo.
            Note: If you want to save both the original and the marked up photos, mark the Save as New Photo option and tap Save. If you want to only save your marked up photo, clear the Save as New Photo option and tap Overwrite.

         4. Tap Done to attach it to the entry.

       • To take a video:

         1. Tap Video.

         2. Tap the shutter to start the video.

         3. Tap the shutter again to stop the video.

         4. Tap Done to attach it to the entry.

     • Photos: Tap to select photos from your device's gallery or from Procore's Photos tool in the project.

       • To add photos from Procore's Photos tool:

         1. Tap Procore's Photos tool.

         2. Tap the album that contains photos.

         3. Tap the photo(s) you want to attach.

         4. Tap Done to attach photos to the entry.
            Note: You can also tap Create New Album to add a new photo album to the project. However, you must have 'Standard' or 'Admin' permissions on the Daily Log tool to create an album.

       • To add photos from the device:

         1. Tap Photos from Device.

         2. Tap the required photos.

         3. Tap Done to attach the photos to the entry.

     • Files: Tap on a file from your mobile device to automatically attach it to the entry.

6. Tap Save.
   The log entry is created or added.