Create a Transfer

  1. Navigate to the project's Materials tool.

  2. Add materials that need to be adjusted to your active list. See Add Materials to List.

  3. Click Create and select Transfer.

  4. Enter the date.

  5. Under 'Transfer to Location', select the new location for materials. Note: This is the initial location that is applied to all line items. You can modify line items to any location after you click 'Build Document'.

  6. Optional: Add any notes.

  7. Under 'Line Items', click the quantity field for each line item and enter the quantity of material to be transferred.

  8. Optional: Mark the checkbox if you want to Clear (Active) List After Building Document.

  9. Click Build Document.

  10. Under 'Document Line Items', review the line items and enter the new storage location, if needed.

  11. Review quantities and date. Click into the field to make an update.

  12. Review the status/condition. Click into the field to make an update.

    • Unchanged. The status of the material is the same as before.

    • Unchecked. The material is unavailable in inventory. This indicates that someone needs to inspect the material to ensure it's acceptable and available for use.

    • Checked > Acceptable. The material is acceptable and available in inventory.

    • Hold. The material is unavailable in inventory. This indicates that the materials are being held out of inventory, and is typically used when damage is noted.

    • Added. Increases the available inventory quantity.

    • Removed. Decreases the available inventory quantity.

    • Scrapped. Decreases the available inventory quantity.

    • Surplus. The material is unavailable in inventory. This indicates that the materials are no longer required for the project, but may be needed later for other uses

    • Return to Vendor. Decreases the available inventory quantity.

    • Return to Stock. Increases the available inventory quantity.

  13. Review the 'From Location' field for each line item and make changes as necessary.

    Important icon Important

    This is especially important if the material is stored in multiple locations.

    • Update an individual line item:

      • Click the From Location field and select the location from the drop-down menu.

    • Bulk update line items:

      1. Mark the checkbox for each line item.

      2. Under 'Storage Location', select the From Location from the drop-down menu.

      3. Do one of the following:

        • Click Set Selected to set the location for the selected items.

        • Click Set All to set the location for all line items.

  14. Review the 'To Location' field for each line item and make changes as necessary.

    Tip icon Tip

    In addition to existing locations and containers, you can also create a new container and add materials.

  15. Optional: Upload Attachments to Materials.

  16. Click Pending next to 'Document Status' and select Post to confirm the transfer.

Transfer Overview
Manage UOSD Defects Overview