Capture Photos Using the Redesigned Camera (Android)

Background

The redesigned Procore camera consolidates primary controls for easier one-handed operation and organizes photo metadata into a single menu. You can use the updated camera to adjust flash and zoom settings, apply metadata to organize your project photos, and connect a 360° camera to capture and review panoramic images.

Things to Consider

  • Required User Permissions: 'Standard' or 'Admin' level permissions on the project's Photos tool.

  • Android Prepositions and Gestures: Use standard touch gestures, such as tapping and long pressing, to access quick controls on your device.

  • Metadata Persistence: Any metadata selections you make apply to all subsequent photos you take during your current camera session until you change them.

Prerequisites

  • Install the Procore mobile application on an Android mobile device.

  • Connect a compatible 360° camera to your device via Bluetooth or Wi-Fi (if capturing 360° photos).

Steps

Capture Standard Photos and Adjust Controls

  1. Navigate to the project's Photos tool on your Android device.

  2. Tap the Camera icon to open the camera interface.

  3. Optional: Adjust your camera settings using the consolidated controls:

    • Flash: Tap the flash icon to cycle through flash modes, or tap and hold the flash icon to select a specific mode directly.

    • Zoom: Tap the zoom icon to cycle through preset zoom levels (0.6x, 1x, 2x, 3x), or tap and hold the zoom icon to slide along the fine-tune zoom scale.

    • Camera Mode: Swipe or tap between 360°, Markup, and PHOTO modes.

  4. Tap the shutter icon to capture a photo.Note: Captured photos appear in the photo session tray as a stacked preview.

Add Metadata to Photos

  1. In the camera interface, tap the metadata icon to open the 'Metadata' window.

  2. Complete the following fields as applicable:

    • Album: Select an album from the drop-down menu to categorize your photos.

    • Drawing: Select a project drawing to pin your photos to a specific location.

    • Location: Select a project location or sub-location.

    • Trade(s): Select one or more trades associated with the photo.

  3. Tap Done to apply the metadata to future photos.

Capture and Review 360° Photos

  1. In the camera interface, tap 360°.

  2. When the 'Connection Successful' window appears, tap Connect to pair your 360° camera.

  3. Tap the shutter icon to capture a 360° photo. The application automatically downloads the image from your connected camera.

  4. Tap the photo session tray thumbnail to open your recent captures.

  5. Tap a 360° photo, then drag your finger across the screen to pan and review the full 360° view.

Note: Adding metadata such as Location and Trade during capture makes it faster to filter and locate specific images later in the Photos tool.

See Also

Loading related articles...